SANDING SOLUTIONS
Achieving the perfect finish on a boat starts with proper surface preparation, and sanding is the first crucial step. Whether you’re working with gelcoat or clearcoat, the goal is to remove imperfections, oxidation, and any old coatings to create a smooth foundation for polishing.
RUPES Marine sanding products are designed to provide effective and consistent results, ensuring that your surfaces are ready for the next phase. With the right combination of sanding tools and pads, you can tackle even the toughest jobs, leaving a flawless, uniform surface that sets the stage for high-quality polishing and protection.
Explore the best options to ensure that your boat’s surface is prepared for perfection.
TOOLS
SURFACE PREPARATION BEFORE REPAIR
RUPES DUAL ACTION SANDERS WITH DUST EXSTRACTION
SURFACE PREPARATION BEFORE POLISHING
RANDOM ORBITAL PALM SANDERS WITH DUST EXSTRACTION
SURFACE PREPARATION BEFORE POLISHING - SMALL AREAS AND DENIBBING
DUAL ACTION SANDERS
ABRASIVES
RUPES ABRASIVES LINE
MULTIPURPOSE ABRASIVES PAPER DISC
Grit: from P40 to P500 | Ø150mm
The Ø 150mm (6’) MP330 Multi-purpose Abrasive Paper Discs provide a very high cutting power thanks to the aluminium oxide with the top coat treatment. The high performances and durability are guaranteed by the latex reinforced paper. They are ideal for gealcoat and painted surfaces in the marine industry.
FILM ABRASIVE DISCS – NO HOLES
Grit: P1500 | Ø75mm
These Ø75mm HQ400 discs without holes are perfect for eliminating small defects and allow sanding with precision avoiding to flatten the surface excessively. They are ideal for gealcoat and painted surfaces in the marine industry.
FOAM SANDING DISC – MULTIHOLES
Grit: P1500, P2000 and P3000 | Ø75-125–150mm
The RUPES Foam White Disc is designed for dry sanding, featuring a new perforated multihole system for pre-polishing finishes. Available in diameters Ø75, Ø125, and Ø150, and grits P1500, P2000, and P3000, these discs provide optimal performance for smooth, high-quality results. They are ideal for gelcoat and painted surfaces in the marine industry.
SOFT INTERFACE MULTIHOLES
Ø75-125-150mm | Thickness: 7mm and 12mm
The multihole Foam Interface Pads, developed inhouse by RUPES, enhance sanding performance by allowing the sanding disc to adapt to hull shapes for a more consistent finish. Available in Ø150mm, Ø125mm, and Ø75mm diameters, with 7mm or 12mm thicknesses options. The microhooks ensure strong engagement and protect against hook damage, while the premium foam construction improves durability.
FILM ABRASIVE DISCS – MULTIHOLE
Grit: from P40 to P2000 | Ø150mm
The Ø150mm HQ400 film abrasive discs have a15 holes perforated polyester film backing that ensures higher sanding efficiency and extended life. Resistant to humidity, with reinforced edges, they work efficiently even on wet surfaces and have a long life cycle. They are ideal for gealcoat and painted surfaces in the marine industry.
FOAM ABRASIVE DISCS
Grit: from P1500 to P3000 | Ø 75-125-150mm
RUPES X-Cut foam abrasive discs are designed for wet sanding applications and sanding on contours or rounded edges. They create an outstanding finish without deep scratches that requires reduced compounding and polishing steps. They are ideal for gealcoat and painted surfaces in the marine industry.
ADHESIVE ABRASIVES
Grit: P2000 and P3000 | Ø 30mm
Self-adhesive waterproof discs are designed specifically for fine sanding in small areas, featuring a lightweight paper backing paired with ultra-fine abrasive grains to deliver precise and efficient performance in boat sanding applications.
SOFT INTERFACE – NO HOLES
Ø75-125-150mm | Thickness: 7mm and 12mm
The Foam Interface Pads without holes, developed in-house by RUPES, enhance sanding performance by allowing the sanding disc to adapt to hull shapes for a more consistent finish. Available in Ø150mm, Ø125mm, and Ø75mm diameters, with 7mm or 12mm thicknesses options. The microhooks ensure strong engagement and protect against hook damage, while the premium foam construction improves durability.
CERAMIC DENIBBING BLADE
The RUPES Ceramic Denibbing Blade is designed for efficient and safe removal of paint drips, runs, and dust nibs from smooth surfaces. Made from durable ceramic material, it provides consistent results. Its chamfered edge and tilted application allow for safe removal of severe defects with minimal pressure, reducing the risk of damaging surrounding paint. Ideal for quickly eliminating imperfections in the marine industry.
DUST EXTRACTION
DUST EXTRACTION SYSTEMS
The S230 and the S245 Vacuum Cleaners have a special structure that ensures resistance and manageability during movement in all kind of workplaces. Their shape enables maximum expansion of the filter bag, while the automatic filter cleaning system ensures maximum extraction efficiency in all working conditions. These mobile dust extraction systems are available in different versions for both electric and pneumatic tools.
The RUPES KS300 is a Professional Vacuum Cleaner with integrated workstation that guarantees high filtration efficiency with 5m2 filtering surface and three filtration steps. This compact, maneuverable, and powerful Vacuum Cleaner can support two operators simultaneously and it is availbale in two versions: with dual motor technology that features two 1200W motors, or with one 1100W brushless motor.
The KR2A Mobile Workstation Turbine is an extremely flexible and efficient vacuum unit. Its compact design makes it easy to install and move around the workspace. The KR2A serves as a complete mobile workstation, providing everything needed for daily tasks. Now equipped with an automatic filter cleaning system, it ensures optimal performance. Both electric and pneumatic tools can be connected using RUPES flexible suction hoses. Additionally, the integrated cabinet offers convenient storage for pads, tools, and other essential accessories.
